Categories

Composite Corrosion Resistance Test Chamber

Model: PW-CCT1080
The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil;
Description SPECIFICATION
The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil; in order to analyze the samples under specific environmental conditions and evaluation.
 
Model PW-CCT1080
Internal size 200x90x60(WxDxH)cm
External size 295X125X172(WxDxH)cm
Without temperature and humidity host (W125*D60*H110)
Power supply AC3ø   380V  40A  50HZ
Test box interior It is welded and formed by PP beige, with a thickness of 10mm. The temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time using CASS, ACSS and NSS tests.
Thermostatic case Using PP beige heat-resistant and impact-resistant board, PP board mainly plays the role of protection and beautification.
Chamber upper cover It is formed by PP welding, the thickness is 10mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time in the CASS, ACSS, NSS test (automatic opening and closing).
Test refill drum Using PP whiteboard, the capacity is 100L.
Test chamber basket frame Using GRP temperature-resistant angle material, the angle can be 20°±5° from the product test angle, and the testing bracket can be customized.
Saturated air drum Made of SUS#304 stainless steel plate, thickness 2mm, with automatic water level controller to avoid the inconvenience of manual water addition.
Safety devices 1. Low water level protection of the box. Saturator low water level protection. Saturator over-temperature protection.
2. Refrigeration system compressor overheating, overload, overpressure, overtemperature protection. The test chamber has extreme over-temperature protection, automatic pressure balance protection, and bottom protection against water accumulation.
3. The humidification heat pipe of the humidification system is dry-burning, water shortage is abnormal, and the heating pipe is short-circuited.
4. Heating system heating tube limit over-temperature, heating tube short circuit protection.
5. The main power supply is protected from overload, leakage and short circuit, phase losse, and the control circuit is protected from short circuit and overload. Circulating fan overload, short circuit.
6. With sound and light alarm device.
PW INSTRUMENTS (GUANGDONG) CO.,LTD    POWERED BY UEESHOP