The electric rolling roller is suitable for the preparation of test specimens such as the peeling force of the adhesive tape and the stickiness. Using the weight of the roller itself, the test piece can be completely adhered to the test board for the adhesion retention and peeling force For use.
Design standard: ASTM D3330, GB/T4851, GB/T2792, CNS 11888, PSTC-8
With two sets of rolling rollers, two sets of test pieces can be made at the same time
Rolling wheel weight: 2㎏, surface coating rubber hardness 80°±5°, and after grinding treatment
Rolling speed: 5~2200mm/ min Rolling stroke: 50～500mm, can be set
When testing, the machine will automatically go back and forth once
The roller can be removed when the test piece is placed, which is convenient and safe to operate
Rolling wheel width: 45mm
Distance between two rolling wheels: 70MM;
Effective stroke: 460MM
The position of the roller bracket allows the roller to be suspended and not deformed when the roller is not in use. The stepper motor system is used for transmission. The speed error is within 1%.