TS series constant temperature and humidity test chamber

Model: PW-TS series
T/T
FOB
WOOD
Description Specification
Product Discription
The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
 
Characteristics
◆ Appearance: high texture appearance, the body adopts circular arc shape, the surface is processed by fog stripe, and adopts plane non-reaction handle, easy to operate, safe and reliable.
◆ Observation window: rectangular multi-layer glass viewing window, which can be used to observe the test products in the test. The window is equipped with anti-sweat electric heater, which can be used for waterproof gas condensation water drops, and high brightness PL glister light to keep the lighting inside the box.
◆ Water supply system: It is equipped with an external water supply system, which is convenient for supplementing the water supply in the humidifying drum and recycling automatically.
◆ Compressor: The compressor circulation system adopts French "Taikang" brand, which can effectively remove lubricating oil between condensing tube and capillary tube, and the whole series adopts environment-friendly cold coal (R404, 507).
◆ Control mode: intelligent PID+SSR/SCR positive and negative two-way synchronous output, including advanced slope control logic.
◆ Controller: with multi-segment program editing and temperature and humidity can do fast (OUICK) or slope (SLOP) control.
◆ System capacity: 150 groups of programs ×1500 sections can be logged in, the number of sections can be divided arbitrarily, and the programs can be freely connected to each other.
◆ Cycle setting: 9999×999 times cycles can be performed, and 5 separate cycles can be cut out.
◆ Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, to facilitate the execution of timing planning for the start/stop of external driver components.
◆ Safety inspection: 15 items of full-function system detection to ensure safe operation of the machine.And can automatically display the time of failure, items and elimination countermeasures.
 

 Model

 TS-80-40M

TS-150-40M

TS-225-40M

TS-408-40M

TS-1000-40M

 Capacity

 80L

150L

225L

408L

1000L

 Interior size (cm)W*H*D

 40*50*40

50*60*50

50*75*60

60*85*80

100*100*100

 Exterior size (cm)W*H*D

 93*131*81

100*155* 110

100*170* 120

110*180* 140

150*195* 165

 Single maximum currently(A)

 8A

10A

13A

14A

24A

 Rated power(KW)

 3.5KW

6KW

7KW

9KW

13KW

 Weight(KG)

 260

310

320

400

700

 Temperature range

 -40~+150

 Temperature stability

 ±0.5

 Temperature uniformity

 ±2.0

 Humidity range

 20%~98%RH

 Humidity stability

 ±1.5%

 Humidity deviation

 ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH

 Heating up

 heat up from -40 to +150,≤60mins

 Cooling down

 cool down from +20 to -40, ≤40mins

 Ambient temperature

 ambient temperature condition for the chamber working:+5~+35

 Exterior material

 1)stainless steel; 2)galvanized steel sheet bake finish

 Interior material

 SUS304 stainless steel

 Insulation technology

 outer rigid polyurethane foaminter glass fibre cotton

 Refrigeration mode

 mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling

 Refrigeration compressor

 totally enclosed plunger compressor imported from France (low noise/environment protection)

 Refrigerant

 environment protection R404A(DuPont)

 Circulating fan

 high temperature induction motorcentrifugal wind wheel

 Heater

 high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater

PW INSTRUMENTS (GUANGDONG) CO.,LTD    POWERED BY UEESHOP