Capacity |
10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation) |
Temperature Range |
0, -20, -40, -60, -70℃~150℃ |
Display |
Computer display mode |
Force Resolution |
1/250,000 |
Force Accuracy |
≤±0.5% |
Stroke Resolution |
0.005mm |
Control Mode |
Tensile tester all computerized operation mode |
Temp. Control |
PID automatic calculation, stable error |
Display Accuracy |
0.1℃ |
Temp. Accuracy |
±1℃ |
Circulation System |
Fan force circulation system |
Heating System |
stainless steel heat radiation type of heater |
Cooling System |
Fan cooling type, high-efficiency compressor, environmental protection cooling medium |
Protection Device |
Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device |
Chamber Material |
SUS#304 stainless steel |
Test Stroke |
1300mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Width |
720mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Speed |
0.5~500mm/min, can set by computer, with up & down fast adjustment button of grips |
Force Unit Switch |
Kgf, N, Ibf, g, ton, Mpa |
Stop Mode |
Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function |
Machine Dimension |
110×160×220cm(W×D×H) |
Machine Drive |
Servo motor drive, synchronous wheel and precision ball screw drive |
Power |
400W |
Machine Weight |
Approx 420kg |
Power Supply |
220V 50/60HZ 30A |
Standard Device |
Extension pole of grips, heat abstractor, 1 set of grips, computer software, USB computer connection wires |
Optional |
Personal computer |