Drenching Rain Test Chamber

The rain test chamber can realistically simulate the drenching test environment, used for various automotive parts. Mobile phone shell. Electrical products. IPX3.IPX waterproof rating test shell and seal in the rain environment can ensure the good performance of equipment and components of the test. This equipment adopts a scientific design, which makes the equipment can realistically simulate various environments such as drenching and splashing. Into the comprehensive control system and frequency conversion technology, so that the rainfall test specimen rack rotation angle, the swing angle of the water spray pendulum and the water spray swing frequency can be automatically adjusted.

This rain test equipment is made of high-quality materials, using the most advanced processing equipment in China, and imported high-quality stainless steel plate. Indoor sample racks and other accessories are stainless steel or copper material production, reasonable design, durable.

The waterproof test equipment tank body adopts the overall structure, divided into the left, middle, and right three parts, the selection of high-quality materials, the use of advanced technology processing and shaping, inside and outside the shell are selected high-quality SUS304 stainless steel plate production. Indoor sample rack and other accessories are made of stainless steel, reasonable design, durable. High-pressure water jet assembly/working rotary table/electrical controller part of the composition.         

IP34 Related parameters and specifications:

1. Inner box size (mm): W1000 × H1000 × L1000.
   Outer box size (mm): W1380 × H1900 × L1050, barrel: L2000 W300 H400
2. Test bench: diameter Φ450mm, speed about 1-5 rpm, height adjustable;
3. water spray ring radius (m): 0.4m, removable (waterproof of the third level, waterproof of the fourth level in the a test method);
4. Jet pipe swing angle range: vertical direction can be ± 60 ° or ± 160 ° range swing (can be set);
5. Diameter of water spray hole (mm): φ0.4;
6. Pendulum tube: This equipment is equipped with 1 R400mm pendulum tube, the nozzle is Φ0.4mm hole, and the standard number of nozzles is 25.
7. Flow rate of each nozzle: 0.07L/M (adjustable), the flow meter shows direct reading;
8. Pendulum time: each swing (2 × 120 °) about 4S, or each swing (2 × 320 °) about 12S;
9. Test time: 1-999,999min (can be set);
10. Material: stainless steel or powder spraying (parts that need to contact with water are made of stainless steel).
11. Control system: PLC+stepping motor+touch screen;
12. Safety protection devices: power overload, short circuit protection, grounding protection, water shortage protection, alarm ringing tips;
13. Power supply: 1#, 380V, 50Hz.
14. The machine adopts a PLC+stepping motor+touch screen control system: the angle of the swinging tube, swinging speed, and testing time can be set directly on the touch screen.


IP56 Related parameters and specifications:

1. 2 spray nozzles are installed on the IPX56 in the longitudinal direction. IPX5 spray nozzle 1, IPX6 spray nozzle 1;
2. Spray hole inner diameter: IPX5 (grade) φ6.3mm, IPX6 (grade) φ12.5mm
3. Spray water flow: IPX5 (grade) 12.5±1 (L/min), IPX6 (grade) 100±5 (L/min)
4. Pipe diameter: one four-point, one-inch high-pressure soft-pressure hose.
5. Turntable: one, speed: 3 ± 1R / min
6. Spray duration: 3, 10, 30, 9999min (adjustable)
7. Running time control: 1M ~ 9999min (adjustable)
8. Water recycling system to ensure water recycling.
9. Control system: self-developed touch screen control system.
10. On the door of the water tank of the equipment, toughened glass is used as waterproof wall.
11. The inner box is made of SUS304=1.0 brushed plate, and the whole is fully welded and assembled.