Two-chamber Thermal Shock Tester

Overview of the Products:

1. Product application:
Thermal shock test chamber is suitable for solar photovoltaic modules, batteries, automotive components, LED photoelectric, semiconductor, aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining the parameters and performance of electricians, electronics and other products and materials for high and low temperature test after the impact changes in the temperature environment.

2. Product positioning:
For aerospace, aviation, electronics, automotive, batteries and other products and quality control institutes, research institutes, universities and other test units to provide virtual space, simulate the real environment, product testing, verification of research and development results, the test chamber is to shorten the development cycle, improve product quality and reliability of the indispensable assistant.
Low and high temperature storage tank, according to the test needs to move the test products, and to achieve rapid impact effect, self-researched temperature balance technology, different from the traditional use of high-powered refrigeration against high-powered heating of the freezing balance technology, the adoption of on-off refrigeration energy regulation technology - the central controller according to different temperature points to control the size of the cooling capacity, in order to achieve temperature static balance, while allowing the equipment The operation is always in a relatively low power consumption state, energy saving and environmental protection.

 

Basic Information Indicator:
Product name：Two-chamber Thermal Shock Tester    
Product model：PW-CTS2-150-60W
Inner box size：W600×D500×H500mm（WXDXH）
Outer box size：W1430×D2150×H2000mm  (WXDXH)
Inner box volume：150L
Opening mode：upper and lower double doors (right side open)
Cooling method：water-cooled
Machine weight：about 1150KG
Power supply：AC 380V 42 KW
Body colour：PW standard colour or (customized according to customer's requirements)
Working noise：A sound level ≤ 75dB(A)
(Measured 1m in front of the main door at a height of 1.2m above the ground, in free space)

Temperature Indicator:
High temperature chamber:
(1) Thermal upper temperature: +200℃
(2) Heating up time: room temperature → +200℃ ≤40min
Note: The temperature rise time is the performance of the high temperature box when operating alone
Low temperature chamber:
(1) Pre-cooling lower temperature: -75℃
(2) cooling time: room temperature → -75 ℃ ≤ 60min
Note: The cooling time is the performance of the low temperature box when operating alone
Shock temperature:
(1) High temperature shock temperature range: +60℃～+150℃
(2) low temperature shock temperature range: -60℃～0℃
Temperature fluctuation:≤±0.5℃
Temperature uniformity:±2.0℃
±1.5℃（when ≤+100℃) 
±2.0℃ (when >+100℃)
Temperature resolution: 0.01°C
Impact test method: pneumatic vertical basket type
Impact recovery time: ≤5min or less (when low temperature impact is not less than -50℃)
≤8min or less (for low temperature shock -50°C to -60°C)
Hanging blue conversion time: completed within 10sec
Standard load capacity: 300W heat generation 5kg aluminium sheet