Water-cooled Two-chamber Thermal Shock Tester

Introduction:

PW-CTS2-50-100W PW INSTRUMENTS introduces a 50L compact cold and thermal shock tester with self developed temperature balancing technology, different from the traditional use of high power refrigeration against high power heating freezing balancing technology.
The on-off refrigeration energy regulation technology - the central controller controls the cooling capacity according to the different temperature points to achieve a static temperature balance, while keeping the equipment running at a relatively low power consumption, saving energy and protecting the environment.

Performance: (air-cooled, refers to the room temperature at +25 ℃, no load)    

1. High temperature tank impact range: +40 ℃ ~ +150 ℃   
2. Low temperature tank impact range: -0 ℃ ~ -80 ℃ 
3.Temperature uniformity: ≤±2℃
4. Temperature fluctuation: ≤ ± 0.5℃.
5. High and low temperature shock constant temperature time: 5 min
6. Basket transfer time: within 5 seconds
(Temperature performance test is measured according to the relevant provisions of IEC60068-3 standard; the sensor is placed at the unit air outlet)

1. Studio size: W400 × H400 × D320 mm (internal box size can be customized)      
2. External dimensions: approx. W1200 × H1840 × D1875mm
3. Box structure: with independent product testing area, high temperature heat storage area, low temperature storage area
4. Inner box material: stainless steel plate (SUS 304#)
5. Outer box material: steel plate baking paint
6. Insulation material: high temperature tank: 24k glass wool
Low temperature tank: PU foam + glass wool
7. Heater: bare wire type electric heater
8. Air supply circulation system    
a.TECO motor
b.Stainless steel elongated shaft
c.Multi-wing fan (SIROCCO FAN)
9. Door: single piece door, 1 type of high temperature tank and 1 type of low temperature tank
a. Flat recessed handle
b.Back knob: SUS 304#
c.Silicone foam strip
10. Test hole: 1 x ψ50mm hole in the body, 1 x silicone plug head.
11. Test material placement shelf: stainless steel SUS 304# 2 pieces of shelf tray.
12. Mobile castors: including mobile castors (with foot cup).
13. Drive: cylinder drive.
14. Tightening: silicone foam tightening.